Saniflo SaniAccess 2 Upflush Toilet Complete System (W/ Macerator Pump + Tank & Bowl)$ 1,070.15
A complete toilet system designed for home or commercial use, the Saniflo Saniaccess 2 is one of our top-selling units. Complete with a macerator pump, tank, and bowl, the Saniflo Saniaccess 2 makes any half-bathroom addition easy and straightforward.
Designed to pump vertically, up to 15 feet, and capable of connecting to a toilet and sink, the Saniflo Access 2 offers easy installation, modern looks, and long-lasting functionality.
Included in our kit is the Saniflo saniaccess2 macerator pump, a tank and bowl, and a free soft-close toilet seat for your convenience and comfort! Options include a standard or elongated (ADA compliant) bowl, an extension pipe that makes behind-the-wall installation simple, and a descaler to remove hard water deposits in the macerator.
The unit can install up to 150 feet from a soil stack and is perfect for handling effluent from a toilet or sink in a residential setting. While it’s not designed for heavy commercial use, it will make the perfect addition to your home. The new design of the previous SaniTOP model, this unit offers more benefits than even its capable predecessor.
Have questions? Contact our team today to learn more.
Type: Macerating Upflush Toilet
Product #: 081, 005, (083 or 087)
Ideal Use: Half Bathroom Addition
Features and Benefits:
- Pumps vertically up to 15 ft
- Connects a toilet and a sink
SaniACCESS2 macerating pump, tank and bowl plus FREE soft-close Toilet Seat!
Specifications & Installation Manual:
SaniACCESS2 - Official Manual
The Saniflo Saniaccess is a system that is used to install a half-bathroom up to 15 feet below the sewer line, or even up to 150 feet away from a soil stack. It can handle the effluent from a toilet and sink in a residential application. (This is the new design of the previous SaniTOP model.)
The SaniACCESS 2 is simple itself to install; there are just four connections:
- The macerator/pumping device is connected to the spigot of a horizontal rear discharge toilet
- The toilet’s tank is connected to the water supply
- The macerator/pumping device is connected to the small diameter pipe work
The macerator/pumping device is connected to the electrical supply
How It Works: Saniflo Instructional Video
Warranty: 2-Year Full Manufacturer Warranty
Extended 3-Year Warranty with Product Registration (www.Saniflo.com/Register)
How It Works:
The inside of the Saniaccess comprises a pressure chamber, which starts and stops the unit, and the motor, which drives the stainless steel macerator blades and the pump. When the flush is activated, the water flowing into the Saniflo Access activates a micro switch in the pressure chamber, which in turn starts the motor. The motor is sealed for life in an oil-filled enclosure.
A common spindle/shaft drives the impeller and the macerator blades. The moving parts, therefore, are kept to an absolute minimum. Water and organic waste matter enter the chamber and are reduced to a slurry as the macerator blades rotate at 3600 RPM.
The centrifugal force causes the reduced solids to be ejected through a grill into the container where it is picked up by the impeller pump mounted beneath the motor. The unit pumps the effluent upward to 15 feet and/or 150 feet horizontally (with gravity fall). Once the water level in the container goes down, the micro switch deactivates the unit until the flush is activated again.
A normal operating cycle for SaniACCESS 2 takes about 10-15 seconds depending upon the discharge pipe run configuration. Power consumption is, therefore, minimal.
In addition to the toilet waste, the SaniACCESS 2 will also get rid of gray water from an additional fixture such as a sink. Note that the required gravity flow toward the pump needs to be at least 1/4" per foot.
The wastewater from the sink is transferred into the SaniACCESS 2 via a 1-1/2" inlet on the top of the unit. The discharge elbow on top of the SaniACCESS 2 can be turned either to the left, to the right, or toward the back, depending on the discharge installation. A non-return valve, which comes already assembled on the discharge elbow, prevents backflow into the unit.
This unit has been designed with a vent connection on the lid. All plumbing codes require a connection to a vent system. Please note that the vent system should be a two-way air vent. The use of mechanical vents, air admittance valves or similar devices are not permitted, as these are considered one-way air vent systems.
It is also highly recommended for the macerator/pump to be connected to a Ground Fault Interrupter (GFI) circuit.
The design of this model consists of vibration absorbers which enable the reduction of operating sound by reducing the transmitted sounds from any location where such resonance transmission could occur. This new design reduces the operating sound of this pump by 10dB.
Periodic maintenance can be accomplished easily without having to disconnect the unit from either the toilet or the rest of the plumbing system. Through one service panel, a service contractor can access the electrical components as well as the level sensor mechanism of the pump.
The second service panel provides ready access to the basket area around the macerating blades for easy removal of any large objects that may have been accidentally flushed.
The SaniACCESS2 unit must be connected to our rear’s discharge toilet. This system uses much less water than a regular toilet. Note: This toilet only works in combination with the SaniACCESS2. All additional items may be purchased separately.
The SaniACCESS2 works as a system and therefore a toilet bowl (003 or 007), toilet tank (005) and the macerating unit (081) need to be purchased. An optional extension pipe (030) is available for the pump to be installed behind the wall. No other fixtures, cabinets, showers or bathtubs shown in example pictures are included.
Plumbing Code Certified:
The SaniACCESS2 has been certified to American and Canadian Standards. Macerating standard; US: CSA Certified & IAPMO (UPC) listed - ASME A112.3.4, CA: Macerating Standard CSA B45.9.