Saniaccess 3$ 1,312.88
Saniflo Saniaccess 3
The one-half HP pump system is known as the most advanced, easy-to-install residential macerator in the world. The Saniaccess 3 can be installed up to 15 feet below a sewer line, and up to 150 feet from the nearest soil stack.
The macerating system is designed to handle human waste, toilet paper, feminine hygiene products, and grey water. The blades of this unit are made from hardened stainless steel, which means they’re durable enough to last for many years to come without replacement.
Whether you’re looking for a pump that will allow you to add a bathroom to a basement or what used to be a closet, or simply want to hook a shower, sink, or bathtub up to a durable macerating pump, this option could be the right one for you for a full bathroom renovation. Contact our skilled salespeople today to learn more about the benefits of our product.
Type: Macerating Upflush Toilet
- Pumps vertically up to 15 ft
- Connects a toilet, sink, shower and/or bath
- Easy Installation
Specifications & Installation Manual:
SaniAccess3 - Official Manual
The SaniACCESS3 is a system that is used to install a complete bathroom up to 15 feet below the sewer line, or even up to 150 feet away from a soil stack. It can handle the effluent from a toilet, sink, bathtub and shower.
- The SaniACCESS 3 is simplicity itself to install; there are just four connections.
- The macerator/pump is connected to the spigot of a horizontal rear discharge toilet.
- The toilet tank is connected to the water supply.
- The macerator/pump is connected to the small diameter discharge pipe work.
- The macerator/pump is connected to the electrical supply.
How It Works: Saniflo Instructional Video
Warranty: 2-Year Full Manufacturer Warranty
Extended 4-Year Warranty with Product Registration (www.Saniflo.com/Register)
How It Works:
The inside of the Saniflo SaniACCESS 3 contains a pressure chamber and a motor, which drives the stainless steel macerator blades and the pump.
When the toilet flush is activated, the water flowing into the Saniaccess 3 from the toilet activates a micro switch in the tank pressure chamber, which in turn starts the motor. The motor is sealed for life in an oil-filled enclosure. A common shaft drives the impeller and the macerator blades.
Water and organic waste matter enter the chamber and are reduced to a slurry as the blades rotate at 3,600 RPM. The centrifugal force causes the reduced solids to be ejected through a grill into the container where it is picked up by the impeller pump mounted beneath the motor. The unit pumps the effluent upward to 15 feet and/or 150 feet horizontally.
Once the water level in the container goes down, the micro switch deactivates the unit until the flush is activated again. A normal operating cycle for the Saniflo Saniaccess 3 takes about 10-15 seconds depending upon the discharge pipe configuration.
The waste water from other sanitary fixtures is discharged into the Saniflo Saniaccess 3 via two 2-inch inlets on either side of the housing. The discharge elbow on top of the Saniaccess 3 can be turned either to the left, to the right, or toward the back, depending on the discharge installation. A non-return valve prevents backflow into the unit.
This unit has been designed with a vent connection on the lid. All plumbing codes require connection to a pipe and vent system. Please note that the pipe and vent system should have a two-way air vent. It is also highly recommended for the macerator pump to be connected to a Ground Fault Interrupter (GFI) circuit.
Note: Only works in combination with Saniflo toilet systems.
Plumbing Code Certified:
The Saniflo Saniaccess 3 has been certified to American and Canadian Standards. Macerating standard; US: CSA Certified & IAPMO (UPC) listed - ASME A112.3.4, CA: Macerating Standard CSA B45.9. All Rights Reserved
SaniAccess 3 by Saniflo
$ 1,352.00 -15%
$ 1,149.20 FREE SHIPPING