Sanicubic 1$ 2,023.30
SaniCUBIC 1 Macerating / Grinding Pump
Looking for a macerating pump that’s ideal for an entire home addition? Look no further than the Sanicubic 1. Designed to pump waste vertically up to 36 feet, this pump makes it possible to connect your toilet, sink, shower, bath, washing machine, laundry sink, kitchen sink, and dishwasher to a single unit. Easy-to-install and even easier to maintain, the Sanicubic 1 is a favorite among customers who want a durable macerating pump they don’t have to spend much time thinking about.
Made of stainless steel, this grinder utilizes a 1-HP motor that is housed inside a durable enclosure. The macerator features a high-performance grinding system that reduces waste solids into a fine slurry and pumps them up against gravity. People love the full two-year manufacturer warranty, and the extended three-year warranty available when you register the product with Saniflo.
Type: Macerating/Grinding Pump
Product #: 089
Ideal Use: Entire Home Addition
Features and Benefits:
- Pumps vertically up to 36 ft
- Connects a toilet, sink, shower, bath, washing machine, laundry sink, kitchen sink, and dishwasher
SaniCUBIC 1 macerating/grinding pump
Descaler: cleaner, removes hard water deposits in macerator
Specifications & Installation Manual:
The SaniCUBIC 1 is a pre-assembled heavy-duty simplex grinder pump that meets the demanding needs of commercial and residential sewage applications. The grinder system made of stainless steel liquefies solids into small particles prior to being passed through the 1-1/2" discharge. It is designed to handle multiple waste fixtures for applications such as residential single or group homes, commercial buildings, schools and many more.
This new system consists of a 1-HP motor housed inside a compact but highly durable plastic enclosure. The motor has a high-performance grinding system and a fast-rotating cutting blade to reduce solids in the waste water stream from toilets, tubs and showers, sinks, washing machines, dishwashers, etc.
The SaniCUBIC 1 operation is as simple as the installation. The effluent enters the pump through one of four different inlets – one on either side of the unit at the bottom and two along the top. The inlets can accommodate 1-1/2" or 4" diameter pipes. As soon as the waste water level reaches the trigger point, the pumping system activates. The effluent is then pumped out through 1-1/2" diameter rigid pipe connected on the top of the pump. Maximum pumping distances are 36 Ft vertically and/or 328 Ft horizontally.
Warranty: 2-Year Full Manufacturer Warranty
Extended 4-Year Warranty with Product Registration (www.Saniflo.com/Register)
How It Works:
The inside of the SaniCUBIC 1 comprises of a couple of pressure switches and a circuit board assembly, which starts and stops the unit, a powerful motor, which drive the stainless steel cutting blade and the pump. The motor is sealed for life in an oil filled enclosure. A common spindle/shaft drives the impeller and the macerator blade. The moving parts therefore are kept to an absolute minimum. Water and organic waste matter that enter the enclosure are reduced to slurry and are picked up by the impeller mounted beneath the motor.
The pump is able to handle up to 50 gpm. If the incoming rate is higher than the discharge rate, the pump automatically signals the "alarm" stage. This will activate the visual alarm mounted on the pump's control panel and the audible alarm from the wired control box (if connected).
This grinder pump can be retrofitted into an existing sewage ejector basin of at least 24" in diameter for a quick and easy pump exchange. As this is considered a "plug and play" device, no chains or floats are needed.
Note that the effluent pipe leading into the pump has to be installed with the required ¼" per foot gravity flow. There must be a 10" height difference (from pump to connecting fixture) if the drain is connected to the bottom inlet.
The waste water from other sanitary fixtures is discharged into the SaniCUBIC 1 via four 1½-inch or 4" inlets, on either side of the housing and on the top of the enclosure. The internal discharge pipe comes equipped with a check valve that prevents back flow into the unit. Isolating valves (ball, gate valves) must be installed on waste inlets and on the discharge pipe to ensure that any service/maintenance may be carried out safely.
This unit has been designed with a 1-1/2" vent connection on the top of the enclosure. All plumbing codes require connection to a vent system. Please note that the vent system should be a two-way air vent. The use of mechanical vents, air admittance valves or similar devices are not permitted as these are considered one-way air vent systems.
Plumbing Code Certified:
The SaniCUBIC 1 has been certified to American and Canadian Standards. Macerating standard; US: CSA Certified & IAPMO (UPC) listed - ASME A112.3.4, CA: Macerating Standard CSA B45.9.
This grinder pump is ordered as a single unit only. No other fixtures are included.