SaniSHOWER by Saniflo$ 310.25
SaniSHOWER Water Pump
If you’ve been looking for a small yet mighty boat shower, the Saniflo Sanishower marine shower is the go-to. A compact yet durable gray water pump, this unit will move gray water away from your shower, sink, bar sink, or other wet fixture. Small enough to sit beneath a raised shower base, it makes a popular choice in a boat shower or similar application. The unit can also sit behind a wall or next to a shower, which makes it ideal for small spaces. Don’t let its size fool you, though - the Sanishower works hard. Capable of pumping wastewater up to 15 feet in height and/or 100 feet away from a soil stack, the Saniflo Sanishower makes an excellent choice for a marine shower.
Wondering how this unit works when you hook it up to your boat shower? The inside of the unit contains a pressure chamber, which starts and stops the unit according to use. When water flows into the pump, it activates a micro-switch and starts the motor. The water is then pumped away and into a sanitary sewer. Normal operating cycles for this marine shower run as short as 2-10 seconds.
Type: Gray Water Pump
Product #: 010
Ideal Use: Shower Addition
Features and Benefits:
- Pumps vertically up to 12 ft
- Connects a shower to any existing sink
- Easy Installation
SaniSHOWER gray water pump
Descaler: cleaner, removes hard water deposits in macerator
Specifications & Installation Manual:
The SaniSHOWER is a small gray water pump that may be used to pump waste water away from a shower, sink, bar sink, or other fixture. The SaniSHOWER is small enough to fit underneath a raised shower base. Alternatively, it can be placed behind a wall or beside a shower. The SaniSHOWER will pump wastewater up to 12 feet in height and/or 100 feet away from a soil stack.
Warranty: 2-Year Full Manufacturer Warranty
Extended 3-Year Warranty with Product Registration (www.Saniflo.com/Register)
How It Works:
The unit pumps the effluent upward to 12 feet and/or 100 feet horizontally (with gravity fall). Once the water is discharged and the water level in the container goes down, the micro switch deactivates the unit until water enters the unit again. A normal operating cycle can be as short as 2 - 10 seconds depending upon the discharge pipe run configuration; power consumption is therefore minimal.
In addition to sinks, the SaniSHOWER will also accept and discharge the waste water from a variety of other sanitary fixtures such as: a shower, a urinal, etc. When adding a shower, a base will have to be constructed. This base should be made out of a 2" x 6" (minimum) or 2" x 8" (recommended) on edge, to allow for the installation of a P-trap and the required 1/4"per foot gravity flow towards the pump unit.
This unit has been designed with a vent output on the side. All plumbing codes require connection to a vent system. Please note that the vent system should be a two-way air vent. It is also highly recommended for the gray water pump to be connected to a Ground Fault Interrupter (GFI) circuit.
Plumbing Code Certified:
Like all relevant Saniflo products, this unit has been certified to American and Canadian Standards. Electrical standard UL 788, CA: Electrical standard CSA C22.2.